
Isuzu Truck DENSO ECU DELETE(DEF/SCR/AdBlue DPF EGR) instruction
For get result with any Isuzu Truck delete work – SCR DPF EGR off, request follow the instruction: 1. Remove ECU from truck, connect with

HINO DX2. DPF reset function
For HINO 2008 SH7058 choose: Clear DTC function “Delete all”. Need make it when no DTC too. 2. Check Inspection Menu. “Start Inspection” Make “Reset

Kubota Red Lamp, Not Start, Beeper solved
Many tractors and other machines with kubota engine often has problem with SCR DPF EGR components. For example DPF problems: Diagnosctic manual Kubota V3800.pdf DPF

MB Actros 1845 450hp 2019
Completed Stage1 power solution for ECU SiemensContinental MCM2.1 Read/write dump via Alientech Ktag in bench mode with special cable 144300T116 Truck was did and tested
BitBox 3.3.8 rev1
New modules: Isuzu Transtron SH7058/SH7059/SH72533/SH72544 supports reading/writing and checksums calculation. New families: [EXCLUSIVE] Ford Continental EMS2701 TC1791 added to module Ford Continental Petrol CAN with virtual reading/writing and checksums
Happy New Year!
We congratulate you, dear colleagues, on the upcoming new year! It has been a long, not simple and very eventful year. We have developed a
Instruction PCMFlash Module 64 – Mitsubishi Fuso Canter
Foreword about EDC7C4-6/EDC16C31: 1) It’s the same thing, it’s actually an EDC7 in an EDC16 case. Euro 3 and 4 toxicity standards. In these ECUs,
Instruction MMCFlash Module 49 – Ford SID208/SID209
1. Read password via OBD, or with direct connection to ECU 2. Make connections like in pictures, read BSL, Unlock BSL. 3. Unsolder resister and
Instruction PCMFlash Module 58 – VAG DSG/CVT
Module 58, designed to work with the ECU, DSG and CVT. It supports writing on ” OBD ” (the main purpose – tuning), as well
Instruction PCMFlash Module 62 – Ford/Getrag 6DCT450
Support Read/Write/Clone: PowerShift TCM (6DCT450) [RD/WR] PowerShift 6DCT450 Boot (MICRO) [RD/WR] PowerShift 6DCT450 Boot (EEPROM) [RD/WR] Instructions for use: Work on OBD (can read /
Instruction PCMFlash Module 57 – SIMOS 8/10/11/PCR2.1
SIMOS 8.xx was installed to Audi with large motors. SIMOS 8.1, 8.2, 8.3, 8.4, 8.5 work via OBD, without the need for any action. For 8.3,